Matco Tools OST321 Manual Del Usuario

WARNING
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these instructions
in a safe accessible place.
INTENDED USE OF THE TOOL
This kit is designed for repairing damaged spark plug, glow
plug and lambda probe threads. Always assure you are
using correct size tool for the operation being performed.
Do not use this tool outside of the designed intent. Never
modify the tool for any other purpose or use.
WARNING
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using this
product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and Bystanders).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size
and design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.
10 PIECE OXYGEN SENSOR
THREAD REPAIR KIT M18X1.5
MODEL:
OST321
MADE IN TAIWAN
10 PIECE OXYGEN SENSOR
THREAD REPAIR KIT M18X1.5
Important
Read these instructions carefully before
installing, operating, servicing or repairing this tool.
Keep these instructions in a safe accessible place.
2
PRODUCT INFORMATION:
• A unique tool for repairing damaged spark plug,
glow plug and lambda probe threads.
• Quick and easy repair without extensive
component disassembly.
• Easy to use and repair threads properly with a
tight seal to prevent leaks.
• Thin wall bushings with rust protective coating.
• Repairs threads easily without expensive tools
or machining.
• Kit includes:
1pc - Thread cutting tap M18X1.5 L=50MM
1pc - Thread cutting tap M20X1.5 L=50MM
1pc - Piloted reamer M18X1.5 L=50MM
1pc - Installation screw for threaded insert
M18X1.5 L=90MM
1pc - Screwsleeve 27HX81MM
5pc - Threaded insert with flange IG=M18X1.5 /
AG=M20X1.5 L=9MM
DO NOT DISCARD – GIVE TO USER