Safety Information; Preparation; During Use - Power Probe AMP PPDCM80 Manual Del Usuario

PPDCM80

1. Safety Information

Read and follow all safety guidelines outlined in this manual before
use to prevent personal injury or damage to the meter.
in accordance with
requirements for electronic measuring instruments with and over-voltage category
of CAT Ill 600V and pollution degree of 2.
Follow all safety instructions to ensure safe usage of the meter.
Proper usage and protection will ensure a long life of the meter.

1.1 Preparation

• When using the meter, users must follow standard safety rules:
Use protection against electrical shock
Do not misuse the instrument
• Check the meter for damage during transport
• Check the test leads for damage to the insulation or wires before use.
• Only use the test leads provided with the meter. Re- place only with similar leads

1.2 During Use

• Always select the proper function and range before measurement.
•
range of measurement.
• Do not measure voltages that exceed 600V between terminals and earth ground.
• Always be careful when working with voltages above 60V DC or 30V AC RMS.
• Choose the highest range when the value to be mea- sured is unknown
beforehand.
Warning
GB4793.1-1995 (EN61010-1,EN61010-2-032)
- 3 -
EN
safety