Tronsmart Encore S2 Plus Manual Del Usuario página 5

Charge
Voice assistant
Reset
Three-way call
SPECIFICATIONS
Model
Bluetooth
Chipset
Bluetooth compatibility
Transmission range
Frequency
Battery capacity
Play time
Standby time
Charging time
Dimension
Weight
CONNECT THE ENCORE S2 PLUS TO 2 BLUETOOTH
DEVICES
1. Turn ON the Bluetooth setting of Device 1 and then pair the headphones
with it.
2. Turn OFF the Bluetooth setting of Device 1.
3. Turn ON the Bluetooth setting of Device 2 and then pair the headphones
with it.
4. Turn ON the Bluetooth setting of Device 1 again and then click the
connection history to pair with headphones back.
5. After two devices pair with the headphones, you can listen to and take
hands-free calls from either device.
The indicator will go on red when it is in charge
and will become blue when the charge has been
finished.
Hold the multifunction button for 2 seconds to
activate the personal assistant from your device.
During charging state, hold the multifunction
button for 5 seconds. After a sound prompt heard
and the blue indicator flashes quickly twice, the
headphones have been reset to factory setting.
Tap the multifunction button to answer a call.
While the second phone call comes, tap twice to
achieve three-way call, or tap once to answer the
second call and end the first call.
Encore S2 Plus
5.0
QCC3003
HSP, HFP, A2DP, AVRCP
10m/33ft
2402 - 2480MHz
250mAh
Up to 24 hours
200 days
About 2.5 hours
468x18x12mm / 18.42x0.7x0.47in
35±5g / 1.23±0.2 oz
3