Getting Started - TE-Group mrHandsfree Blue Mini Manual Del Usuario

CHARGING THE BATTERY
The mr Handsfree Blue Mini headset comes with a rechargeable battery included. For first time use, it takes about 24
hours to fully charge the battery. Afterwards, it takes about 2 hours to fully charge the battery. When the battery is fully
charged, the talk time is 8 hours, and the stand-by time will be about 200 hours. The best performance of the Blue
Mini's battery is achieved by charging and discharging the unit completely for 3 times.
Plug the Travel Charger (7) into an AC outlet.
Gently press the adapter until it clicks into place.
battery is fully charged, the red indicator (4) on the headset will turn off.
Note:
1. When you hear 5 short beeps through the speaker of the headset, repeated every 20 seconds, the headset is
running on low battery. Charge the headset for 2 hours until the red indicator (4) will turn off.
2. The headset has to be recharged every two months, when it is not in use during a long time.
MAIN FUNCTIONS MULTIFUNCTIONAL AND VOLUME BUTTONS & RED LED
INDICATOR
MF-Button (3):
Power on/off
Answer / end / transfer calls / redial
Pairing
Volume Button (2+8):
Adjust volume
Mute-function
Red LED indicator (4):
Headset action
During pairing
Pairing successful
Standby-mode
Battery under charging
Battery charged
TURNING THE HEADSET ON/OFF
To turn the headset on:
Press and hold the MF- button (3) for 5 seconds.
flashes. The headset is now turned on.
2

GETTING STARTED

GETTING STARTED
Connect the adapter (6) into the headset (5) as shown in the picture.
The red indicator (4) on the headset will light up.
Red LED lights up constantly
Red LED starts flashing every 4 seconds
Red LED flashes every 4 seconds
Red LED is turned on constantly
Red LED turns off
You will hear 1 short tone and the red indicator (4) of the headset
GB
Red indicator
When the