Pairing The Headset - TE-Group mrHandsfree Blue Mini Manual Del Usuario

To turn the headset off:
Press and hold the MF-button (3) for 4 seconds.
lights up shortly. The headset is now turned off.
You are required to pair the Blue Mini headset with your mobile phone once before using it.
Each Blue Mini headset has a default PIN-code 0000 for pairing, which is stored in its internal memory. You are usually
required to enter the PIN-code 0000 in a pairing process with a Bluetooth
depends on the kind of Bluetooth
The Blue Mini headset must be turned off before initiating pairing.
cator (4) lights up constantly.
mobile phone to pair with the Blue Mini headset. (Refer to the manual of your mobile phone.)
of the list with found devices on your mobile phone.
enter 0000 and confirm it.
4 seconds.
Note:
1. If the Blue Mini headset is not in pairing mode, your mobile phone won't find the headset. Please set the headset
into pairing mode before letting your mobile phone search for the headset.
2. If no pairing is possible for a period of time (approx. two minutes), the headset will automatically leave pairing
mode. You may need to start all over again.
3. Paired devices remain paired even when:
• One of the devices is not turned on.
• A service connection is interrupted or the service stopped.
• One or both devices are rebooted.
CONNECTION
In some cases the Blue Mini can be disconnected from your phone and you will need to restore the connection.
• If the Blue Mini has been switched off: Switch on the power and press the MF-button (3) for 1 second.
• If the mobile phone has been switched off: Turn on the mobile phone and restore the connection via the phone's
menu.
• If one of the two devices has been out of range: Make sure that both devices are within working range and press
the MF-button (3) once.
Note:
For all mobile phone types, it is recommended to set "Trust" or "Authorized" for Blue Mini in the Bluetooth
your mobile phone. Please refer to the manual of your mobile phone for more detailed information.
DISCONNECTION
You can disconnect the headset from your phone when, for example, you want to use another Bluetooth
your phone. The Blue Mini can be disconnected in the following ways:
1. Switch off the headset.
2. Disconnect the headset in the phone's menu.
3. Move the phone more than 10 meters away from the headset.
You will hear 1 short tone and the red indicator (4) of the headset

PAIRING THE HEADSET

PAIRING THE HEADSET
®
device that the headset is connected to.
The headset is now ready for pairing.
When the pairing has been successful, the red indicator (4) of the headset will flash every
3
®
mobile phone or other devices; however it
Press and hold the MF-button (3) until the red indi-
Initiate the pairing process on your Bluetooth
You will be asked to enter the PIN-code to complete pairing,
GB
®
Select Blue Mini out
®
menu of
®
device with