Troubleshooting Guide - Ingersoll Rand 7UL Serie Especificaciones Del Producto

Trouble Shooting Guide
Trouble
Hose will not fully
retract
Hose will not retract
at all
Reel will not latch
Reel retracts too fast
(E�-Coil�� Models only) �� Models only) Models only)
Hose locks up when
fully extended
Parts and Maintenance
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
80231061_ed1
Cause
a) Outlet nozzle, gun or tool is
too heavy.
b) Spring is fatigued.
c) Field installed hose is too
long.
Spring has lost all tension or
has possibly broken.
Incorrect operation.
E�-Coil�� unit is defective. �� unit is defective. unit is defective.
Hose clamp is in the incorrect
position.
Remedy
a) Add spring tension. See
"Spring Tension Adjustment".
b) Add spring tension. See
"Spring Tension Adjustment".
c) Call local Distributor for
correct specified hose length.
Reinstall Spring Tension.
Reel latches on first, second,
third or fourth "click". After
forth "click" it automatically
rewinds.
Replace E�-Coil�� unit. �� unit. unit.
Note: When weather is
extremely hot, reel will
operate slightly faster than
under normal conditions. This
function is normal.
Relocate hose clamp to
optional location.
EN
EN-3