Siemens 6ES7138-7EC00-0AA0 Manual Del Usuario página 5

Εnglish
PS AC120/230V Power Supply,
6ES7138-7EC00-0AA0
Product Information Leaflet
This product information leaflet contains important information
about the PS AC120/230V power supply submodule.
Characteristics
 The PS AC120/230V power supply supplies all of the
output voltages required for the ET 200iSP. The output
voltages are electrically isolated from the AC 120/230V
supply voltage (that you connect to the TM-PS-A UC or
TM-PS-B UC terminal submodule) and are intrinsically
safe.
 The PS AC120/230V power supply is plugged into the
TM-PS-A UC/TM-PS-B UC terminal submodule.
Further information
Further information about the PS AC120/230V power supply
submodule is provided in the ET 200iSP Distributed I/O
(6ES7152-1AA00-8BA0) operating instructions.
These operating instructions can be requested from the
Siemens representative or office in your area or free-of-
charge on the Internet at:
http://www.siemens.com/automation/service&support
Maintenance
The power supply is maintenance-free. If a repair is
necessary, the power supply must be returned to the
following address:
Siemens AG, Elektronikwerk,
Östliche Rheinbrückenstr. 50, D-76187 Karlsruhe
Repairs may only be performed by the manufacturer.
A5E02433496-01 Εnglish