Tabla de contenido
Publicidad
Please read carefully the following information to prevent in-
juries, damage to
material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide
immediate information in terms of the probability of occurrence as well
as the type and severity of the consequences if the measures to prevent
hazards are not complied with.
DANGER
WARNING
CAUTION
IMPORTANT
1.
Risk of electrical shock
WARNING
•
Read the operating instructions prior to use
•
Make sure the device has been de-energised prior to working
on it
•
Do not remove contact protection panels
•
Avoid contact with conducting parts
•
Do not bring plug contacts in contact with pointed and metal
objects
•
Use in intended environments only
•
Operate the device using a power unit meeting the specifications
of the type plate only!
•
Keep the device/power unit away from humidity, liquid, vapour
and dust
•
Do not modify the device
•
Do not connect the device during thunderstorms
•
Approach specialist retailers if you require repairs
2.
Hazards during assembly (if intended)
CAUTION
•
Read the operating instructions prior to assembly
•
Avoid coming into contact with sharp edges or pointed compo-
nents
•
Do not force components together
•
Use suitable tools
•
Use potentially enclosed accessories and tools only
3.
Hazards caused by a development of heat
IMPORTANT
•
Prevent externally heating up components and ensure an exch-
ange of air
•
Do not cover the fan outlet and passive cooling elements
•
Avoid direct sunlight on the device/power unit
•
Guarantee sufficient ambient air for the device/power unit
•
Do not place objects on the device/power unit
Safety information
Warns of a directly hazardous situation causing
death or serious injury.
Warns of a potentially hazardous situation that
may cause death or serious injury.
Warns of a potentially hazardous situation that
may cause minor injury.
Warns of a potential situation that may cause
material or environmental damage and disrupt
operative processes.
Contact with parts conducting electricity
Risk of death by electrical shock
Sharp components
Potential injuries to fingers or hands during assem-
bly (if intended)
Insufficient device/power unit ventilation
Overheating and failure of the device/power unit
Publicidad
Tabla de contenido
