Perel Tools CSOL06 Manual Del Usuario página 4

• Respect a minimum distance of 0.5 m between the device and any
other object.
• All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
• Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
• Keep this manual for future reference.
4. Features
• recharges by sunlight via 0.33W solar panel
• lights up in the dark through the 0.07W LED
• shines at full strength (0.07W + 0.3W LEDs) when the PIR sensor
detects motion within 2-3m range
• no wiring, fast & easy installation
• for wall mounting
• on/off switch
• stainless steel housing
• water & corrosion resistant
• IP44
• for outdoor use.
5. Operation
Refer to the illustrations on page 2 of this manual.
a. Switching on and Off
• To switch on the device, push the on/off button [1] in the AUTO
position (down). The lamp will automatically light up in standby
mode at night: only the LED behind the horizontal strips [5] is lit.
• When the device detects motion, the bottom LED [6] lights up as
well to illuminate the area.
• To switch off the device, push the on/off button [1] to the OFF
position (up). The battery will charge, but the lamp will not light
up at night.
V. 01 – 12/11/2015
CSOL06
4 ©Velleman nv