Safety Recommendations - THOMSON WM40i Manual De Instrucciones

WALL MOUNT MICRO SYSTEM
Carefully read the instructions of this manual, respecting recommendations for use and safety. Keep this document and
tell potential users about it.
This appliance has been designed solely for domestic use; the manufacturer's liability shall not be engaged in the event of
any professional use, any misuse or any use not complying with the operating instructions.
This symbol, representing a lightning bolt inside
an equilateral triangle, is intended to alert the
user to the presence of uninsulated, dangerous
voltage in the product's enclosure that is high
enough to present a risk of electrical shock.
This symbol, representing an exclamation mark
inside an equilateral triangle, is intended to
alert the user to the presence of operating and
maintenance instructions in the documentation
accompanying the product.
This appliance complies with the standards in
force for this type of product.
Elimination de l'appareil en fin de vie
Cet appareil comporte le symbole DEEE
(Déchet d'Equipement Electrique et
Electronique) signifiant qu'en fin de vie, il ne
doit pas être jeté aux déchets ménagers, mais
déposé au centre de tri de la localité.
La valorisation des déchets permet de
contribuer à préserver notre environnement.
Disposing of batteries at the end of their life
In order to respect the environment, do not
throw used batteries out with household waste.
Dispose of them at your nearest recycling
centre or at a used battery collection point.
ATTENTION: This symbol
indicates that this appliance
is a
CLASS 1 LASER PRODUCT
Class 1 Laser product.
Do no try to open the cover or
look at the laser beam.
Never touch the laser lens
inside
the compartment.
WM40i

SAFETY RECOMMENDATIONS

WARNING CONCERNING USE AND INSTALLATION
ATTENTION: To avoid all risk of fire or electrical shock, do
not expose the appliance to rain or humidity. Therefore,
the appliance should not be used near a water supply
point or in a humid location (bathroom, swimming pool,
sink, etc).
ATTENTION: Never immerse the appliance in water or in
any liquid whatsoever.
• Do not place any object containing water (e.g. vases,
etc.) on the appliance.
• Do not place the appliance in full sunlight, close to
heating equipment or any heat source, or in a location
subjected to excessive dust or mechanical shocks.
• Do not expose the appliance to extreme temperatures.
The appliance is designed for use in moderate climates.
• Do not place any object that produces heat (candle,
ash tray, etc.) close to the appliance.
• Place the appliance on a surface that is flat, rigid and
stable.
• Do not install the appliance in an inclined position. It is
designed to work solely in a horizontal position.
• Install the appliance in a location with sufficient
ventilation to avoid internal overheating. Avoid
restricted spaces such as bookcases, cabinets, etc.
• Do not obstruct the appliance's ventilation openings.
• Do not install the appliance on a soft surface, such as
a carpet or blanket, that might block the ventilation
openings.
• Do not place heavy objects on the appliance.
• This appliance is not a toy; do not allow children to use
the appliance unsupervised.
• Never let children insert foreign objects into the
appliance.
• Due to the effect of electrostatic and/or fast electrical
transient phenomena, the product may not operate
properly and will need to be reset by the user.
• Keep the player and disks away from appliances
with powerful magnets, such as microwave ovens or
powerful loudspeakers.
• Never move the appliance while you are using it, since
this could damage it and affect the disk. Remove the
disk before you move the appliance.
• If the appliance is moved directly from a cold location
to a hot location, condensation may form on the
lens located inside the disk compartment. Leave the
appliance for at least 30 minutes before switching it on.
• Do not expose the remote control sensor to bright light.
• The mains plug is used as the disconnect device and
it must remain readily operable. For the appliance to
be completely disconnected from the electrical power
supply, the mains plug of the apparatus must be
unplugged completely from the wall socket. The mains
plug should not be obstructed or should be readily
accessible during use.
11 EN