Tool Specification; Part List; Intended Use - IVT HPC-1400 Manual De Instrucciones

Tool specification

Model
Rated power [W]
Voltage/Frequency [V~Hz]
Flow rate [l/min]
Work pressure [bar]
Max. pressure [bar]
Supply temperature max. [°C]
Supply pressure max. [bar]
Lenght of the high pressure hose [m]
Detergent tank capacity [l]
Auto stop
Weight [kg]
Safety class

Part list

1. Transport handle (HPC-1400) Folding transport handle
(HPC-2000; HPC-2400)
2. On/Off switch
3. Connection to water supply
4. High pressure water outlet
5. Storage for handgun
6. Storage for power cord
7. Detergent sprayer (HPC-1400)
8. Detergent tank
9. Gun connector (HPC-1400)
10. Lance with spray regulation
11. Handgun
12. Lock-off button
13. Wheel (HPC-2000; HPC-2400)
14. High pressure hose
15. Winding high pressure hose device (HPC-2400)
16. Switch lever
17. Nozzle cleaner
18. Intermediate pipe connector

Intended use

This product line of high pressure cleaners is designed for
outdoor use and is intended for cleaning surfaces as well as
various objects, tools, vehicles and boats. The device is powered
by water, which flows in under high pressure from the entry
spout ensuring highly effective cleaning.
You find in the area of specialized trade or on our website our
assortment of accessories which allows extensive application.
With the use of appropriate accessories cleaning solutions
may be injected into the water stream, and the device can be
adapted for drain/sewer cleaning or rust/paint removal.
HPC-1400 HPC-2000
1400
230~50 230~50
4.5
60
90
40
3
3
0.5
+
6.5
II
Safety regulation for the use
General safety rules
The following listed safety instructions should serve you for the
right use of the tool and for the protection of your own safety,
therefore, please read this very carefully.
When passing this tool to a third person, these instructions must
be handed too.
Retain this user manual and all other literature supplied with
your tool for any future reference.
Comply with all the safety information and the warnings on the
tool.
Be familiar with the controls and the proper use of the tool
before attempting to use it and above all, make sure you know
how to stop to use it in case of emergency.
Following these simple instructions will also maintain your tool
in good working order.
• The tool must be assembled correctly before use.
• Only use the tool for its designed purposes.
• On the tool, there may be also decals and further indications
about the safety equipment to use that must be considered.
The prevention of accidents is dependent upon the awareness,
common sense and proper training of everyone involved in the
operation, transport, maintenance and storage of the tool.
• Never leave the tool unattended.
• Never allow children to use the tool. Children should be
supervised to ensure that they do not play with the tool.
• Keep children and pets away. All onlookers should be kept
at a safe distance away from the tool when it is in use.
• The user is responsible for third parties while working with
the tool.
• People who aren't acquainted with the operating
instructions, children, juveniles who have not yet reached the
minimum age for using this tool and people under the influence
of alcohol, drugs or medication are not allowed to use the tool.
Local regulations may restrict the age of the operator.
13
Instruction manual
HPC-2400
2000 2400
230~50
5.5 6.0
90 120
135 180
60 60
3 3
5 6
1.0 1.1
+ +
9.5 20
II I
EN