Conceptronic C300Ri Manual De Usuario página 12

ENGLISH
When the 300 Wireless PCI Card is installed in your computer, you can proceed with installing the
N
Conceptronic drivers & software.
A. Insert the CD-ROM in the optical drive of your computer. The AutoPlay option will be shown
automatically. Click on "Run Autorun.exe" to start the autorun menu.
Note: If the AutoPlay option is not shown, you can start the autorun menu by browsing to
"Computer" and double clicking on your optical drive.
B. Select the option "Install Drivers & Software" from the autorun menu. The installation wizard will
appear.
Note: You might get a "User Account Control" warning message, which you will need to accept by
clicking on "Yes".
C. Accept the License Agreement by selecting "I Agree.." and click on "Next" to proceed.
D. Select "Install driver and Conceptronic Wireless Network Configuration Utility" if you want to use
the Conceptronic software, or select "Install drivers only" if you want to use the standard Windows
Wireless Configuration utility. Click on "Next" to proceed.
Note: If you are using Windows XP and selected to install both drivers and utility, you will be asked
which Configuration Tool you want to use. Select "Conceptronic Configuration Tool" and
click on "Next" to proceed.
E. Click on "Install" to install the driver and software.
The drivers & software (if selected) will be installed on your computer.
F. When the installation is finished, click on "Finish" to close the installation wizard.
G. The Conceptronic Wireless Network Configuration Utility will be shown if you have selected to install
the drivers and the software.
Note: It is recommended to restart your computer when the new hardware installation has been
completed.
You can now proceed to chapter 5 to connect to a wireless network.
12
4. Driver & software installation