Logitech Mobile Pro Instrucciones página 4

Pairing with a Bluetooth ® Phone
You must pair your headset to a Bluetooth ® Mobile Phone.
For more details, refer to your mobile phone user guide or contact the phone's manufacturer.
1. Turn on your phone. Make sure the battery is charged in both devices. Turn off the Headset.
2. Press and hold the Multi-function button until the headset indicator light fl ashes blue and red (about 10
seconds).
3. The Headset now is in Pairing mode. Release the button. The indicator light will continue fl ashing red
and blue.
4. Follow the pairing instructions for your Bluetooth® phone. Typically, this is done by going to a 'setup'
or 'connect' menu and then selecting the options to 'discover' Bluetooth® devices.
5. Your phone should fi nd the 'Logitech HS01-Vxx' headset.
Confi rm to pair.
6. Your phone should prompt you for a passkey or PIN.
The PIN/passkey is: 0000.
7. If pairing was successful, the Headset LED will fl ash blue.
8. If pairing fails; turn the headset and phone off and repeat the process.
9. Red and blue fl ashing will return to stand-by mode (blue fl ashing LED) if not paired in 2 minutes.
Headset LED light
The LED light will flash at different speeds and display different colors according to certain
conditions.
Headset Operation
Turning On
Receiving incoming call
Answering call
During call
Mic Mute-on during call
Ending mic mute
Ending call
Pairing
Standby or connected
Voice Dialing
Low Battery
(less than 30 minutes)
Turning off
2
English
LED and Audio Status
5 BLUE flashes, brief low-to-high tone
3 repeating BLUE flashes, melody increases in volume
3 repeating BLUE flashes, single beep when answered
4 repeating BLUE flashes, no beep
4 repeating BLUE flashes, double-beep every 30 seconds
4 repeating BLUE flashes, single beep
3 repeating BLUE flashes, single beep
Alternating RED and BLUE flashes, single high-low tone beep. Repeating BLUE flash when paired
1 or 3 repeating BLUE flashes, no audio
4 repeating BLUE flashes, single beep
RED flashes, last 30 minutes
5 RED flashes, high-to-low tone
(Some functions are phone dependent)