EN
20
CARE AND CLEANING
•
The safety level of the equipment only can be maintained if it is regularly
examined for damage and or /wear and tear.(e.g. handle bar, pedals and
seat ...etc.).It is vital that any faulty parts are replaced and the it is not used
until completed repaired.
•
Regularly check that the elements fastened with nuts and bolts are
correctly tightened.
•
Remember regularly to grease moving parts.
•
Special attention to the component, most of them are susceptible to wear
like brake system, foot pad etc..
•
As sweat is very corrosive, do not allow it to come into contact with the
enameled or chromed parts of the equipment, particularly the computer.
Immediately wipe the equipment after using. The enameled parts can be
cleaned using a damp sponge. All aggressive or corrosive products must be
avoided.
•
Stor the equipment in a clean and dry environment away from children.
PRODUCER
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.