Using The Special Features; Maintenance And Storage - Cuisinart CPT2000E Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
3. Start the toasting cycle by lowering the slide button to
Your bread will automatically go down into the toaster slot.
4. The LED colour control button chosen will remain lit and the lower
fi gures will blink until the end of the browning cycle.
4. When the cycle is complete, the toaster will automatically raise the
toast. If would like to stop the cycle before it is fi nished, simply lift
the slide button to
Tips
• Never force foods into the toasting slots. Foods should fi t freely
between the guides.
• Do not place buttered, fi lled or frosted breads or pastries into the
toaster as these could create a fi re hazard.
• If the slices of bread are uneven, this could result in uneven toasting.
• After use, unplug your toaster from the mains.
B. Using the special features
I.
Feature
This feature fi rst defrosts and then toasts the bread. The toast cycle
is thus slightly longer.
1. Insert one or more slices of bread.
2. Select the desired browning setting depending on the initial
temparture and/or thickness of the bread.
3. Press
. A blue LED indicates this feature is activated.
4. Lower the slide button to
5. When the defrost cycle is completed, the toaster will automatically
raise the bread. If would like to stop the cycle before it is fi nished,
simply lift the slide button to
II.
Feature
This feature reduces the heat on one side of each of the toasting slots
so that only one side of the bread or bagel is toasted. The side to be
toasted should always be turned right when facing the control panel.
1. Insert one or more slices of bread or halved bagels.
2. Press
. A blue LED indicates that this feature is activated.
3. Lower the slide button to
.
to start the defrost cycle.
.
to start the cycle.
4. When the cycle is completed, the toaster will automatically raise
.
the bread or halved bagel. If would like to stop the cycle before it
is fi nished, simply lift the slide button to
N.B. It is possible to use

4. MAINTENANCE AND STORAGE

Let the appliance cool down completely and disconnect it before
cleaning. Wipe the the outside of the toaster with a clean damp cloth,
then dry it carefully.
To remove crumbs, slide out the crumb tray and throw the
breadcrumbs away, then put the crumb collector back in place. Do
not use the toaster without the crumb collector.
To remove pieces remaining in the toaster, turn it upside down and
shake gently to cause the pieces to drop. Never insert a knife or any
sharp object in the toaster as this could cause damage.
.
and
features at the same time.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido