Troubleshooting; Cleaning And Care - PALSON Mr. Pizza Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

TROUBLESHOOTING

PROBLEM
Screeching is heard inside the
electrical appliance.
The cooking stone does not
turn or has difficulty doing so.
The pizza base is not nice and
crusty.
The pizza is burnt.

CLEANING AND CARE:

Unplug the electrical appliance and leave it to cool down completely before cleaning.
Cooking stone cleaning:
Put the cooking stone in hot water, to remove any remains of food.
Warning! No do use any washing up liquid to clean the cooking stone, as it may seep into the cooking stone's pores and
then be absorbed by the food.
Remove any remains of food from the cooking stone. Then swill it again with water and dry it.
If you can not remove the food remains this way, follow the instructions listed below:
Mix 75 g of powdered yeast with three tablespoons of water. Apply the mixture on the dirty parts of the cooking stone.
Leave it to soak for 20 minutes. Clean the remains of food from the cooking stone. Swill the cooking stone again under
water and dry it.
Do not under any circumstances scrape the remains of food from the cooking stone with sharp objects.
Pizza maker cleaning:
Clean it with a soft, damp cloth or sponge. Make sure that water does not come into contact with the heat producing
elements. Then dry.
Do not submerge the pizza maker in water!
Never use paraffin, solvents or any type of abrasive or strong cleaning products to clean the electrical appliance.
Please do not wash any part of the electrical appliance in the dishwasher.
Thank you for choosing one of our products.
CAUSE
The cooking stone is rubbing against the
inside of the electrical appliance.
The cooking stone has not been
inserted correctly.
The cooking stone is obstructed by the
pizza.
The pizza is too big.
The pizza maker has not been
preheated.
The temperature has been set too low.
The pizza has not been baked for long
enough.
The temperature has been set too high.
The pizza has been baked for too long.
SOLUTION
The cooking stone occasionally coming
into contact with the inside of the electrical
appliance is normal.
Leave the electrical appliance to cool
down completely. Put the cooking stone
inside the device correctly.
Place the pizza on the cooking stone
correctly.
Cut the pizza into pieces and bake them
separately.
Preheat the electrical appliance before
putting the pizza in.
Turn the temperature regulator to a higher
temperature (2 or 3)
Extend the baking time.
Turn temperature regulator down.
Shorten the baking time the next time.
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

30570

Tabla de contenido