GBS Elettronica Universal So Manual Del Usuario página 7

Universal So remote is ready to work on Sony TV. If the
programmed code does not work correctly, please perform one
of the following procedures.
Online programming
1. Take note of the TV model. Connect to site
www.gbs-elettronica.it/universal and follow the easy guided
procedure.
If it is not possible to connect to internet, please follow one
of the precedures described here below.
Manual search
1. Turn on the TV device and point the remote control
to it.
2. Press simultaneously
The led turns on steadily.
3. Press
the device off with a different code. As soon as the TV device
turns off, verify that the other keys of the remote control
also work except
works correctly press
pressing
Note: press
Auto search
1. Turn on the device to be controlled, TV or decoder, and
point the remote control to it.
2. Press simultaneously
them. The led turns on steadily.
3. Press the
off each 4 seconds using a different code (the led light of
the remote control remains lit and blinks each 4 seconds). As
soon as the device to be controlled turns off, press any key
of the remote control. The led light emits a brief blink and
then it remains lit again.
4. Press
some cases it is necessary to press key 1 to turn TV on). If the
device does not turn on, press
device on again.
5. Try the other keys except
you found works correctly, press key
key to go on with the auto search.
Note: the auto search has a variable duration. In some cases it
may last even 60 minutes.
Displaying the active code
1. Press simultaneously
release them. The led turns on steadily.
2. Press
displaying the active code as in example: if the active
code is 1203 the led light emits the following: 1 brief
blink indicating 1, 2 brief blinks indicating 2, 1 long
blink indicating 0 and 3 brief blinks indicating 3.
key. At each press the remote control tries to turn
,
key, otherwise go on with search by
key.
key to go back to previuos code.
key, the remote control tries to turn the TV
key to verify that the device turns on again (in
key. The led light begins to blink
and keys and release them.
and keys. If the found code
and keys and release
key and try to turn the
, and
and
. If the code
otherwise press
keys and
UK
7