Mopar 82213752AB Instrucciones De Montaje página 8

8
28. Rotate the PDC to gain access to the
underside of the PDC.
29. Locate circuit F923 (PK/YL) wire at
cavity 13 (1) in the C7 connector on
the underside of the PDC.
30. Splice the red wire from the supplied
body harness (C) to circuit F923 (PK/
YL) wire at cavity 13 of the PDC (splice
and solder new wire to the original
wire using the soldering procedure in
steps 31 thru 34).
31. Place the strands of the wires
overlapping each other inside of the
splice clip (1).
March 5, 2014
www.mopar.com
K6861692AB