Yarvik G1 FORCE Guía De Inicio página 29

4
Virtual Key Mapping
Virtual key mapping / Virtuele toetsen toewijzen / Virtual Key Mapping / Mapping de touches virtuelles / Virtual
key mapping / Mapeamento de Teclas Virtuais / Mapowanie przycisków wirtualnych / Mapování virtuálních kláves
/ Mapovanie virtuálnych tlačidiel / Virtuel tastkobling / Virtual key mapping / Αντιστοίχιση εικονικών πλήκτρων /
Mappatura tasti virtuali / Виртуальное сопоставление клавиш / Virtual Key Mapping (virtuell tilordning av knapper) /
Virtualno določanje tipk / Віртуальне зіставлення клавіш / ‫ / تعيني املفاتيح االفتراضية‬Virtuális billentyű hozzárendelés /
Разположение на виртуална клавиатура / Cartografiere virtuală a tastelor / Virtualno mapiranje tipki
The Virtual Key Mapping™ (VKM™) is an intuitive easy to use application to allow linking of the physical
hardware gaming buttons to the Virtual control buttons of games.
(Fig.1)
After a Game is opened, press on the VKM icon
(Fig.2)
Touch and hold your finger onto the desired VKM button and then slide your finger towards the Virtual
control button on the screen.
(Fig.3-4)
For virtual Direction Pads (D-PAD), move the left joystick to the desired spot. Some Virtual D-PADs are
larger as the standard joystick circle. You can simply enlarge it to by pinching it and resize the joystick to
the correct overlapping size.
For Virtual single push buttons, move the desired VKM key of choice to the correct spot on the screen to link
the corresponding hardware button.
(Fig.5)
After you have mapped out all desired Virtual Keys, press the green
and your mapping for the selected game is saved in memory. The next time you start the game, the system
will automatically remember the saved VKM setting. When you want to change the VKM setting, press the
again and move the desired Virtual Key to the new desired spot and press the green
when ready or press the red
and assign them newly.
(Fig.6)
DELETING A MAPPED KEY
When you want to delete a Virtual Key, which you do not want to use anymore, tap on the virtual key once
and choose DEL and the Virtual Key will be deleted from the screen position. Press OK if you want to keep
the Virtual Key in its position
(Fig.7)
VIRTUAL JOYSTICK MODES
The Virtual mapped joystick has two modes. MODE 1 is for analog joystick mode with circular movements.
to display the VKM control panel overlay.
button to clear all Virtual Keys if you want to clear all mapped buttons
28
button and then the
button
button