Package Contents; Technical Specifications; General Power Tool Safety Warnings - Parkside POF 1200 D3 Traducción Del Manual De Instrucciones Original

Package contents

1 router
1 open-end spanner with slotted hole
1 collet chuck 6 mm
1 collet chuck 8 mm (mounted)
1 dust extraction adapter
1 reducer
1 rip fence with 2 guides
1 copy sleeve with 2 screws
1 centring point
1 cutter set, 6 pieces
1 hex key
1 set of operating instructions
Technical specifications
Rated power input
Rated voltage
Rated no-load speed
Max. operating speed
(milling cutter)
Milling basket stroke
Tool holder
Protection class
Noise emission value
Noise measurement value determined in accordance
with EN 62841. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty K
Wear hearing protection!
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Hand/arm vibration
Uncertainty
POF 1200 D3
1200 W
230 V ∼, 50 Hz
n 11000–30000 rpm
0
n 35000 rpm
max
55 mm
6/8 mm
II / (double insulation)
L = 86.7 dB (A)
pA
K = 3 dB
pA
L = 97.7 dB (A)
WA
K = 3 dB
WA
a = 4.3 m/s
h
K = 1.5 m/s
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
► Try to keep the load as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
2
2
GB │ IE │
3 ■