aqprox appMT17W5 Manual Del Usuario página 17

10. During installation, the setup program will scan Com port
for RS232 eGalaxyTouch controller. Once the controller is
scanned, the setup program will display a dialog.
Click Yes to add the controller on the specified COM port au-
tomatically.
11. Setup is complete. After eGalaxyTouch installation, the
USB device will be found automatically as soon as it was
Plugged into the computer. Then users can see the applica-
tion program window.
12. Users can check the situation of
controllers in Device Manager. If the
controller is set up well, there will be
messages as the picture.