elmeg C48.net Guia De Inicio Rapido página 2

elmeg C48.net
elmeg D@VOS.net (international variant)
PC ports of the PABX systems
The PABX is equipped with a service port and a USB port. The service port is a serial
(RS232/V.24) interface.
The USB port and the service port (RS232 interface) of the PABX system can not
be used both at the same time.
In the default state, the USB port of the PABX system is active.
Via the PABX system's service port you can use the following programs of the elmeg
WIN-Tools:
• Professional Configurator
• Download-Manager
Activating/deactivating the USB or the RS232(V.24) port
You must first activate the service port before you can use it. The USB port is then deac-
tivated. You can then use this code to switch back and forth between the two ports.
b
Lift up Activating the service port
handset
USB is deactivated
Attention: After you have finished all configuration work via the service port you
must reactivate the USB port manually.
After a reset of the PABX system, the USB port. is again active.
*535 #535
or
Deactivating the service
port
USB is activated
a
Hang up
handset