Aqua Medic Reactor 1000 Manual De Instrucciones página 7

1. Parts of the reactor
Fig. 1: reactor 1000
1. Reactor housing filled with Bactoballs
2. Water inlet
3. CO –inlet
2
4. Vent connection incl. stop cock
5. Holding clamps (2 pcs.)
6. Holder for fixing at the aquarium
7. Holding plate
8. Water outlet
9. O-ring at the water inlet and outlet
Technical Data
reactor 1000
Water connection:
CO -connection:
2
Water flow:
Set up:
Available spare parts: Please refer to www.aqua-medic.de.
2. Set Up/installation
The reactor 1000 has two hose connections for 16/18 mm hose and may be used externally or
internally.
- Mounting inside the aquarium
The included holding system allows easy fixing of the reactor at or inside of the aquarium. The
holder is mounted on a crossbar in the aquarium or pushed on an aquarium pane and secured by 2
screws.
Art.-No: 71113
12/16 mm
6/4 mm
min. 1,000 – max. 2,500 l/h
internally or externally
7