System Components; Front And Rear Panels - Shure UA845UWB Guia Del Usuario

System Components

• UA845UWB Antenna/Power Distribution System
• (4) Locking DC power cords (ULXD4)*
• (4) Non-locking DC power cords (QLXD4, SLX4, BLX4R)
• (10) 22 in. BNC cables**
• (2) 6 ft. BNC cables
• (2) Bulkhead adapters for front mounting antennas
• (1) AC daisy-chain cord
• (1) AC power cord
• Rack-mounting hardware
*Not included with Model UA845UWB/LC variant
**Model UA845UWB/LC substitutes (2) 22 in. BNC cables.

Front and Rear Panels

①
UA845UWB
Antenna/Power Distribution System
input:
① Mounts for front-mounted antenna
② RF Power Overload Indicators
Displays RF overload with 2 red LEDs for antenna A and B.
③ Frequency Band Selector
④ Power Switch
⑤ AC Power Input Connector.
⑥ AC Power Output Connector.
Each amplifier has a power output connector for daisy-chaining up to five Shure Diversity Single or Dual Receivers
to a single power source.
⑦ Antenna In Ports, Channel A and B.
BNC connectors for antennas.
⑧ RF Cascade Connectors Channel A and B.
BNC connectors for adding a fifth receiver, or an additional UA845UWB, permitting more wireless receivers to be
connected.
⑨ RF Output Connectors, Channel A and B.
BNC connectors for up to four wireless receivers.
⑩ 15 V DC Connectors
Four connectors for DC power.
4
②
174 - 216 MHz
OVERLOAD
470 - 960 MHz
ANT A
1240 - 1260 MHz
ANT B
1492 - 1525 MHz
1785 - 1805 MHz
output:
⑤ ⑥ ⑦ ⑧
③
SET
Front Panel
⑨ ⑩
Rear Panel
④ ①
POWER
⑨ ⑧ ⑦