Tabla de contenido
Publicidad
• Afin d'éviter tout risque d'électrocution, déconnectez le câble de la prise
électrique avant de déplacer l'appareil.
• Nom du produit : Boîtier SSD externe
• Modèle : ESD-S1C
• Tension nominale : 5V CC
Sicherheitshinweise:
• Benutzen Sie das Gerät nur in Umgebungen, die eine Temperatur von 0
°C (32 °F) bis 40 °C (104 °F) aufweisen.
• Prüfen Sie das Typenschild an Ihrem Gerät, um sicherzustellen, dass das
Netzteil mit der Nennleistung Ihres Geräts übereinstimmt.
• Stellen Sie dieses Gerät NICHT auf schräge oder instabile Arbeitsflächen.
Falls das Gehäuse Ihres Geräts beschädigt wird, wenden Sie sich an den
Kundendienst oder Ihren Händler.
• Legen Sie KEINE Gegenstände auf das Gerät, lassen Sie keine
Gegenstände darauf fallen und schieben Sie keine Fremdkörper in das
Gerät.
• Setzen Sie das Gerät KEINESFALLS Flüssigkeiten, Regen oder
Feuchtigkeit aus. Verwenden Sie das Gerät NICHT während eines
Gewitters.
• Benutzen Sie KEINE beschädigten Kabel, Zubehörteile oder sonstigen
Peripheriegeräte.
• Versuchen Sie NICHT, das Gerät selbst zu reparieren. Kontaktieren Sie
einen qualifizierten Fachmann oder Ihren Händler.
• Um die Gefahr eines Stromschlags zu verhindern, trennen Sie das
Netzkabel von der Steckdose, bevor Sie das Gerät an einem anderen Ort
aufstellen.
• Produktname: Externes SSD-Gehäuse
• Produktmodell: ESD-S1C
• Leistung: DC 5V
ASUS Recycling / Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
Vietnam RoHS
ASUS products sold in Vietnam, on or after September 23, 2011,meet
the requirements of the Vietnam Circular 30/2011/TT-BCT.
Các sản phẩm ASUS bán tại Việt Nam, vào ngày 23 tháng 9 năm2011
trở về sau, đều phải đáp ứng các yêu cầu của Thông tư
30/2011/TT-BCT của Việt Nam.
4
FCC COMPLIANCE INFORMATION
Per FCC Part 2 Section 2.1077
Asus Computer International
Responsible Party:
Address:
48720 Kato Rd, Fremont, CA 94538
Phone/Fax No:
(510)739-3777/(510)608-4555
hereby declares that the product
Product Name :
External SSD Enclosure
Model Number :
ESD-S1C
compliance statement:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Australia Statement Notice
From 1 January 2012 updated warranties apply to all ASUS products,
consistent with the Australian Consumer Law. For the latest product
warranty details please visit http://support.asus.com. Our goods come
with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
If you require assistance please call ASUS Customer Service 1300 2787 88
or visit us at http://support.asus.com.
User Manual : Class B(section 15.105)
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Ver. 180620
5
Publicidad
Tabla de contenido
