Weighing Function - RHINO BACITA-5BL Manual De Uso

WEIGHING FUNCTION

1. Before use, place the balance on a solid, level surface.
Place any container or bowl on the balance before
operation.
OPERATION
1. Gently press the [ON / OFF] button to turn in the balance.
2. After weighing press the [ON / OFF] button for 3 seconds to
turn off the balance.
3.
The balance display will show it´s start routine of segment
as it powers on. Wait until the "0" is shown on the display.
4. Place the item to be weighed on the balance (or in the bowl
if required). The display will show the weight reading.
ZERO FUNCTION
This function weighs different consecutive loads without
removing the object.
1. First place the bowl on the balance and obtain the weighing
reading..
2. Place the bowl and press the [ON-OFF / CERO] button, to
remove the reading from the display and show "0" before
adding what you want to weigh.
WEIGHING MODE
The balance is with three weighing modes. To
measure different items, users can select requerid
weighing mode by pressing the [MODO] button to
convet the desired weighing mode, weight mode, milk
volume mode or water volume mode.
See above display functions.
UNIT CONVERSION
If the balances is with unit systems of metric (g, ml)
and imperial (lb:oz, fl'oz), users can select units
from g to lb:oz or ml to fl'oz.
While the balance is on, select required unit by
pressing the [MODO] button for 3 seconds until the
desired unit is shown, g / lb:oz or ml / fl'oz.
4