Weighing Function; Zero Function; Turning On And Off; Unit Conversion - RHINO BACI-5X Manual De Uso

WEIGHING FUNCTION

1. Place the scale on a hard flat surface.

TURNING ON AND OFF

1. Press the [ON / OFF] button to turn on the scale.
To turn of the scale press the [ON / OFF] button for 3
2.
seconds.
3. Wait until the screen on the scale reads "0" and indicates
the unit of measurement.
4.
Place the articule to be weighed on the balance. The screen
will show its weight.

ZERO FUNCTION

This function allows you to weigh different things
consecutively without removing the object.
1. Place the first object on the scale, obtain the weighing
reading.
2. Press the [ON / OFF/ CERO] button to delete screen
reading and show "0" before adding the next object.
NOTE: When the weight on the scale is greater than 200 g,
"T" will appear on the screen, indicating that the
function is activated.
ADJUSTING THE WEIGHING MODE INDICATOR
Users may choose the weighing unit that they
require by pressing the [MODE] button until they
reach the desired unit of weight. The left corner
of the screen will show the different units of
weight.
Weight mode
Milk volume mode
Water volume mode

UNIT CONVERSION

The users can change from the unit weights of g to lb:
oz to fl'oz.
This is done while the scale is turned on, choose the
unit required by pressing the [MODE] button for 3
seconds until the desired unit is shown g to lb or ml to
fl'oz.
4
"TARE"