HQ HA-HEATER-20 Manual De Uso página 4

Fig. 4
Power Cord
Heating Element
Clamp
Knob
Tube Cover
Upper Post
Middle Post
Lower Post
Power Cord
Base
Join the heating element and the upper post, then fix them tightly by rotating the knob.
After mounting the heater on the stand put the power cord supply in the clamp.
Fig. 5
Heating Element
Depending on how you want to use the heater you change the angle between 0°- 45°
(fig.5)
Caution: Do not change the tilt angel while use.
Risk of fire and/or burn:
Turn off device and let it cool down for approx. 15 minutes.
4