Alber E-Motion ECD Manual Del Usuario página 54

ALL FUNCTIONS IN DETAIL
- The e-motion wheels are then electrically braked for 5 seconds to
prevent them from rolling backwards. Next, two short acoustic
signals sound and the brake function is slowly cancelled. Depend-
ing on the slope and the weight of the person, the wheels are back
in freewheel mode a few seconds later.
- When the push rims are driven (forward or backward) during the
above-mentioned 5 seconds, the brake function is immediately
released and the journey can be continued.
- To switch on the rollback delay, press the button to select the
additional drive function [4].
- The symbol for the rollback delay
the mode has been activated and acknowledged in both wheels.
The symbol is then permanently shown in the LCD.
- The rollback delay is now switched on.
- To switch off the rollback delay, press the button to select the
additional drive function [4] again.
54
flashes in the LCD [2] until