Set Clock / Voice Activation Sensitivity; Soothing Sound / Sleep Timer - Oregon Scientific BBM212 Manual De Usuario

2. Press to enable or disable alarm.
3. Press and hold
default setting is 26˚C (78.8˚F) for high and 19˚C
(66.2˚F) for low.
4. Use + / - to change the setting.
5. Press to confirm.
When the temperature exceeds a high or low setting,
the alarm will sound for 2 minutes and the backlight
will turn on for 8 seconds.
To stop the alarm, press any key except

SET CLOCK / VOICE ACTIVATION SENSITIVITY

1. Press and hold
2. Press + or - to change the setting. To scroll through
the numbers quickly, press and hold + or - .
3. Press to confirm a setting and move on to
the next one. The setting sequence is: 12 / 24 -
hour format, hour, minute and voice activation
sensitivity level (0-3).
NOTE The clock is now set for both parent units and
the voice activation sensitivity is set for all units.
to change the setting. The
.
to enter the setting mode.
LEVEL SENSITIVITY
0 Maximum
3 High
2 Medium
1 Low
NOTE The voice activation sensitivity feature
increases / decreases the level of sound the parent
unit emits. When set to 0, all sounds, regardless of
level, can be heard on the parent unit.

SOOTHING SOUND / SLEEP TIMER

To select and play 1 of 3 soothing sounds:
• Press to turn on a song. Press
to select the song you want (Lullaby, Brook or White
Noise).
To set the sleep timer:
• Press repeatedly to set the unit to turn off
after 15 - > 30- > 60- > or 0 minutes. When 0
minutes is s e l e c t e d t h e s l e e p t i m e r w i l l
automatically turn off after a few seconds.
OR
• Press , this will automatically activate the
last setting you used.
9
repeatedly