ProMed AC-4000 Manual Del Usuario página 15

COMMISSIONING THE DEVICE
Pressing the sleep button for 3 seconds deactivates all indicators of the device, and only the sleep
button remains illuminated. When this button is pressed again briefly, the display "wakes up"
again, and operation is possible. The display will be deactivated again after 5 seconds. Pressing
this button twice stops the sleep function. (The operation with the remote control works independently of
this feature)
Negative ions (anions) are generated: This function causes the release of a high concentration of
negatively charged oxygen ions. These negative ions can eliminate any bacteria remaining in the
air and improve the air quality. Additionally, negative ions can also support metabolism in humans
and improve human health. This function can be activated and deactivated as required (on the remote
control by means of the "Ionizer" button).
The UV button activates the UV-C tubular lamp in the device and thus the photocatalytic filter. This
type of filter is particularly well suited for removing organic material from the air, such as bacteria
and viruses ("Sterilize" button on the remote control).
Pressing the Lock button once activates the child safety lock, which is signalled by the icons
becoming illuminated. This blocks all operating options. For releasing the child safety
lock, press the Lock button (Child lock on the remote control) for 5 seconds. The
icon appears on the display.
After more than 3,000 operating hours, the
reminder that the filter must be replaced. After having replaced the filter, the
indicator is to be reset by pressing the Filter Reset button for 5 seconds.
General power indicator
Indicator for the three fan levels
Room temperature indicator
Humidity indicator
Wi-Fi indicator
Fine dust volume indicator
Air quality indicator (green/yellow/red)
Note: The LED lamp on the far left is always illuminated in white and does not have any function.
OPERATION WITH THE "TUYA" SMART APP
1. By scanning this QR code, you will be redirected to Google Play or
the App Store to download the "Tuya" app.
2. Start the air purifier. Press the fan speed button
seconds until you hear a beep sound.
3. The Wi-Fi display
4. Search the icon of the installed "TuyaSmart" app, click on this app
and register.
will then start flashing.
indicator starts flashing; this is a
for 3-5
15
DE
EN
FR
IT
ES
NL
RU
PL
SE
AR