Care Instructions - ProMed AC-4000 Manual Del Usuario

COMMISSIONING THE DEVICE
16
5. After having completed the password settings and all other
settings as desired, click on "Add device"
select "Small appliance" and "Air purifier (Wi-Fi)".
6. Now enter the name and password of your wireless
network.
7. Check again whether the Wi-Fi indicator
flashing. If not, press the fan speed button
3-5 seconds.
8. On your smartphone, confirm that the Wi-Fi indicator is
flashing and click on "Next". The app will now search for your air purifier and add it to the app. If the
integration has been successful, you will receive the message "added". Now click on "Finish".
9. You can now operate your air purifier by means of the "Tuya" app.
• The operating options are nearly identical to those provided on the
device itself or on the remote control. However, there are also some
additional options, e.g. a timer function with comprehensive features.
• The current air values at the location of the air purifier and the filter
status are displayed.
Caution!
DE
When using an application (app) for operating the unit, the user enters a contractual
relationship with the app provider; Promed shall not assume any guarantees or
liability in the event of any damage caused by such use.
EN

CARE INSTRUCTIONS

FR
• Pull the mains plug before cleaning.
• Please be sure to wear a facemask and gloves when replacing the filter.
• Clean the outer surface of the device only with a soft, damp cloth. Subsequently rub it dry with a soft, dry
IT
cloth.
• Do not use aggressive cleaning agents, benzine, thinners or alcohol.
Filters:
• Depending on how clean the ambient air is, the pre-filter should be cleaned with a vacuum cleaner every
ES
2-3 weeks. It should be cleaned with clear water (and detergent as anti-grease agent, if necessary) every
2 months.
• Let the filter dry completely before inserting it again.
• The intelligence control unit will issue a reminder for replacing the combi filter after 3,000 operating
NL
hours. Under normal ambient air conditions, the combi filter can be used for a maximum of 12 months.
• Both filters can be purchased as set from a specialised dealer or directly from Promed, under www.
promed.de (item no. 334001).
RU
UV-C tubular lamp:
• Clean the UV-C tubular lamp with a dry cloth when necessary. Depending on the amount of operating
hours, the lamp has lifespan of approx. 15-20 months. Due to the declining output, we recommend
replacing the UV-C tubular lamp after 12 months.
PL
• The UV-C tubular lamp can be purchased from a specialised dealer or directly from Promed (item no.
334002).
• Switch off the device before replacing the UV-C tubular lamp. Rotate the lamp in its socket by 90 degrees,
remove the old lamp and insert the new lamp. Now rotate the new lamp in its socket by 90 degrees.
SE
Cleaning the particle sensor: (recommended every 2 months)
Open the sensor (C) cover on the left side of the device. Use a cotton
swab which is slightly moistened on one side (distilled water or alcohol)
AR
to clean the lens. Then use the dry side of the cotton swab to remove any
residual moisture on the lens. Re-attach the sensor cover after cleaning.
,
is still
again for