Premier TV-2757TFT Manual De Instrucciones página 25

7.5.4.Press or
channel No. Press MENU to confirm SWAP.
7.5.5.Press or
¡ø
channel frenquency by little.
¡ø
7.5.6.Press or
searching forthward or backward.TV searching indicater bar will turn
to green from red after search TV signal. TV storage system will
identify as no signal if TV channel are on too weak signal.
¡ø
7.5.7.Press or
¡ø
auto searching from channel 0 in turns of V-L , V-H and UHF. Station
of sufficient strength will be memorized and searching stops.
7.6. PRESET
POSITION, REMEMBER, ANTENNA, and AUTO-SEARCH will
display on the screen as below description:
7.6.1..Press
ct ON, this channel will be displayed when selected. When
REMEMBER is OFF, this channel will not be displayed.
7.6.2.Press or
"AIR, CATV-STD, CATV-HRC, CATV-IRC".
7.6.3.Press or
auto searching. Station of sufficient strength will be memorized and
searching stops.
to select SWAP, then press
to select FINE. Then press
¡ ø
¡ ø
to select SEARCH. Then press
¡ ø
to select AUTO-SEARCH. Press
¡ ø
or to select REMEMBER, and press
to select "ANTENNA" :Press
to select AUTO-SEARCH: Press
-9-
or to select the
or to adjust
or to start
or to start
or to sele
or to select
or to start