Risk Category Index; Recalling Values From Memory - Health Plus BPW-040-HP Manual De Instrucciones

3. When the measurement is completed, the
cuff will deflate entirely and systolic pressure,
diastolic pressure and pulse will be shown
simultaneously on the LCD screen. The
measurement is then automatically stored
into memory.
Note:
1. This monitor automatically turns off
approximately 1 minute after last
operation. You may also press the START/
STOP button to turn the unit off.
2. To interrupt the measurement, you may press
the START/STOP button (recommended) or
the Memory, or Date/Time Set (
The cuff will deflate immediately after a button
is pressed.

RISK CATEGORY INDEX

This monitor comes equipped with a Risk Category
Index that automatically compares each reading
to defined levels established by the U.S. National
Institutes of Health's (NIH) National Heart Lung and
Blood Institute as described earlier in this manual,
and provides a helpful cue if your reading falls into
AVG. 3
ERROR
AVG. 3
) buttons.
17
one of the stages that could potentially indicate
increased risk. No cue is given if the reading falls
in the normal range as defined by NIH. Please
note that cues provided by this monitor are only
intended to assist you in using this table. The
table and cues are only provided for convenience
to help you understand your non-invasive
blood pressure reading as it relates to the NIH
information. They are not a substitute for a medical
examination by your physician. It is important for
you to consult with your physician regularly. Your
physician will tell you your normal blood pressure
range as well as the point at which you may
actually be considered to be at risk.
RECALLING VALUES FROM
MEMORY
1. Press the MEMORY button to access the
memory.
(No Symbol)
18