Steren K-640 Manual De Instrucciones página 18

TROUBLESHOOTING
1.- If the robot doesn't work, check the following:
a) The white BAT connectors are making contact
correctly
b) Check the polarity of the batteries
c) Check the power switch
d) Make sure the 8-pin colour cables are in the right
position
2.- If the eyes of the robot blinks but the robot does not work
correctly to clapping:
a) Check the R-Motor connectors are correctly installed
b) Check the colour cables are the same as shown in
PCB
c) Make sure the head of PCB is correctly mounted, e.g.
the eyes are towards the front
d) Make sure the 8-pin colour cables are correctly
positioned
ENGLISH-18