Pre-Installation; Planning Installation; Tools Required; Package Contents - Commercial Electric 56516141 Guía De Uso Y Cuidado

Pre-Installation

plANNING INStAllAtIoN

Read all instructions before installation. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by
turning off the circuit breaker or by removing the fuse at the fuse box.
This fixture can be installed two ways: 1) onto a keyless lamp holder, or 2) onto an electrical outlet box. Both installation options are
described in this manual. This Guide will first show how to install the fixture onto a keyless lamp holder. This Guide will then show how to
install the fixture onto an electrical outlet box.
nOTe: Keep your receipt and these instructions for proof of purchase.

toolS ReqUIReD

Wire
Strippers
Flathead
Screwdriver

pACKAGe CoNteNtS

part Description
A Fixture Body
Installation to a Keyless
Lamp Holder
1
Attaching the fixture to the
keyless lamp holder
□ Screw the threaded base on the fixture body
(A) clockwise into the keyless lamp holder (not
included).
Safety
Goggles
Phillips
Screwdriver

HARDWARe INClUDeD

quantity
1
part
AA
BB
CC
A
nOTe: Hardware not shown to actual size.
Description
Wire Connector
Mounting Screw
Mounting Bracket
Threaded Base
3
Please contact 1-877-527-0313 for further assistance.
Ladder
Electrical
Tape
quantity
2
2
1
A
Gloves
Wire
Cutters
AA BB
CC
HOMEDEPOT.COM