Getting Started; Ac/Dc Adapter Connection; Auto Off; Low Battery Indicator - Oregon Scientific SmartGlobe 3 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Getting Started

Your SmartGlobe™ 3 base uses four AA size batteries, which are
installed in the back of the base as shown. It is also equipped with an
AC/DC adapter connection, which allows the base speaker to work
without batteries. (AC/DC Adapter not included)
Your smart pen uses two AAA size batteries. To open the battery cover,
remove the screw on the back of the pen with a coin and then pull it
open from the top as shown. Once you have installed the batteries in
the pen, remove the plastic tag from the back of the pen located next
to the reset button. The tag is only for demo use.
Turn on the smart pen by pressing the
AC/DC adapter connection (AC/DC
Adapter not included)
Please remove the batteries from the base
unit before plugging in the AC/DC adapter.
Otherwise the unit may be damaged. Plug
the adapter into the adapter socket (centre
positive type) at the rear side of the unit.
Plug the adapter into a wall outlet.

Auto off

The smart pen will automatically shut off
after a few minutes if it is not being used, and
the base speaker can only be used when
plugged into the smart pen.

Low battery indicator

A flashing red LED light indicates that the
smart pen is running out of batteries.
Note: The clock in smart pen will be inaccurate
when out of batteries for over 2 minutes.

PC requirements

• Windows XP/Vista/7
• 1 GHz or above 32-bit (x86) processor
• 512 MB RAM or above
• 200 MB of available hard disk space

Key functions

Player
Touch this icon to select up to four players in the "Find" activities.
Pause
Touch this icon if you would like to pause the game. Touch it again to
resume your game.
Repeat
Touch this icon to repeat a question or instruction prompt.
Volume
To raise the volume, touch [ + ]
To lower the volume, touch [ - - ]
Demo
Touch this icon to listen to a demonstration of some of the exciting
features and games on your SmartGlobe™3.
Local Map
To use the U.S. map, push in the drawer at the bottom of the base and it will open out, enough for you to
pull it out by its sides. To close the drawer, push it back in until it clicks again.
button.
Caution
• Different types of batteries or new and
used batteries are not to be mixed.
Only batteries of the same or
equivalent type as recommended are to
be used.
• Batteries are to be inserted with the
correct polarity.
• Remove batteries from the unit if the unit
is not going to be used for a long time.
• Remove all batteries when replacing.
• Do not dispose of batteries in fire.
• Non-rechargeable batteries are not to be
recharged.
• Rechargeable batteries are to be removed
from the product before being charged.
• Rechargeable batteries are only to be
charged under adult supervision.
• Exhausted batteries are to be removed
from the product.
• The supply terminals are not to be
short-circuited.
• The base unit must not be connected to
an AC/DC adapter greater than 6V.
• Due to AC/DC adapter connection -
Not suitable for children under 3 years
of age. Use only under adult supervision.
• CD or DVD-ROM drive
• USB port
• Internet Access
The Toy must only be used with the
recommended AC/DC adapter.
The AC/DC adapter is not a toy.
In an environment prone to static
discharge, the unit may malfunction. To
reset, remove batteries or disconnecting
the adapter for at least 10 seconds before
connecting the power supply again.
Toys liable to be cleaned with liquid are
to be disconnected from the AC/DC
adapter before cleaning.
• Any safety isolating adapter to be used
with the toy should be regularly
examined for potential hazard, such as
damage to the cable or cord, plug, or
enclosure of other parts. In the event of
such damage, the toy must not be used
until the damage has been properly
removed.
3
4

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido