Puma Go Manual De Usuario página 20

Timer Mode:
Press S3 shortly from chrono Data mode to Timer mode. The timer
has a 1 second resolution and working range of 1 second to 24
Hours. The watch will give out 5 beeps at 5 minutes, 2 beeps at 2
minutes and 1 beep at 1 minute before the timer counts down to
zero. The watch will beep for 10 second when the timer counts down
to zero. There are 3 kinds of countdown process; cd-S = countdown
Stop, cd-U = count Down Up, cd-r = count Down repeat. These
options can be selected in Timer setting mode.
Count Down Stop- Press S1 to start Timer, S2 to stop. Pressing S4
while the timer is
stopped will return to Timer mode.
When the preset value counts down to zero, beep sound for 10
seconds or press any key to cancel timer alarm. It will auto return to
preset timer screen. While the timer is running, you can check what
kind of timer is set whether cd-S, cd-U, or cd-r by pressing S4.
zeitmesser Rücksetzen
2-3 Sek.
S4
S1
Stopp Start
S2
S1
S4 drücken
38
10 Sek. lang
Hinweiston
Countdown läuft
S4 freigeben
S4 freigeben
Weiter S4 drücken
Countdown läuft
Count Down Up: Press S1 to start Timer, S2 to stop. Pressing S4
while the timer is stopped will return to Timer mode. When the
preset value counts down to zero, beep sound for 10 seconds then it
will auto count up to 99:59'59 hours and beep sounds for 10 seconds
then go back to reset view.
Stopp
S4
S2 S1
Rücksetzen Start
Countdown
S1
läuft
Count Down Repeat: Press S1 to start Timer, S2 to stop. Pressing
S4 while the timer is stopped will return to Timer mode. When the
preset value counts down to zero, beep sound for 10 seconds then
it will auto restart to preset timer. This loop will continue until the
timer is stopped by pressing S2. The maximum countdown repeat
loops are 30 loops and auto stop.
Rücksetzen Start
Countdown
S1
S2 S1
S4 Stopp
Hinweiston Hochzählen
Hochzählen
Sekunden lang
Autom. Wiederholung der Schleife
Countdown läuft
Wiederholung
läuft
Stopp
Hinweiston
ertönt 10
39