Tabla de contenido
Publicidad
TROUBLESHOOTING
Problem
The device fails to switch on
The device does not nebulize
or nebulizes weakly.
The device is noisy.
In the event that the equipment does not resume correctly,
please contact MEDEL CUSTOMER SERVICE.
MAINTENANCE AND REPAIRS
In case of failure, contact qualified personnel authorised by
Medel International Srl. Never open the device. The device
has no user-serviceable parts within and does not need internal
maintenance or lubrication.
100110_MedelSmart_USERmanual_REV.02.21.04.2017.indd 29
Possible solution
• Make sure the battery is charged (if
empty, charge it as indicated in this
owner's manual and switch the device on
after 5 minutes.
• Make sure the plug is properly inserted
in the power outlet.
Make sure the air hose fittings are properly
inserted in the compressor and the nebulizer
connections.
Make sure the nebulizer is not empty or that it
has been filled with the correct amount of medi-
cation (MAX. 6 ml). Make sure that the nebulizer
nozzle is not clogged.
Make sure that the filter is mounted
properly.
EN
29
07/09/2017 12:32:55
Publicidad
Tabla de contenido
