Horizon Global 76527 Instrucciones De Instalación página 4

1. Install hitch – Raise the hitch into position, aligning the slots in the hitch with the attachment holes in the bumper beam. Insert four 1/2" hex bolts with
washers through the hitch and the holes in the bumper beam from the vehicle forward side of the hitch to the rear. Secure with the 1/2" flange locknuts
supplied with the hitch.
Tighten all ½" GR5 fasteners with torque wrench to 75Lb.-Ft. (102 N*M)
Torque fasteners -
2.
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 12 76527NP 8-8-21 Rev. A