Care And Maintenance - Comet Spa CVC 278 XH Manual De Instrucciones

Before removing the motor unit A from
•
the filter canister I, remove the hoses (T
T ) and release the latches G.
2
• Do not pull on the water hoses that lead
from the motor unit A to the tank T.
DRY SUCTION
• Insert the filter E in the tank I.
• Hook up the motor head A on the tank I and
lock it up with the two hooks G.
• Fix the flexible hose L into the suction inlet
H.
• Insert the extensions M into the end of the
flexible hose L and connect the most suitable
accessory.
• Plug the unit in.
• Turn on the illuminated ON-OFF switch C.
• Start the suction and choose 1 or 2 motors by
pressing the switches B.
WET SUCTION
• Remove the filter E from the tank I.
• Hook up the motor head A on the tank I and
lock it up with the two hooks G.
• Fix the flexible hose L into the suction inlet
H.
• Fix, at the end of the flexible hose L, the ex-
tensions M.
• Connect the accessories (O and O
• Plug the unit in.
• Turn on the illuminated ON-OFF switch C.
• Start the suction with 1 or 2 motors by press-
ing the switch B.
INJECTION-EXTRACTION WASHING SYSTEM
• Preparation:
- Remove the filter E from the tank I.
- Pour detergent into the tank T
- Hook up the motor head A on the tank I
and lock it up with the two hooks G.
- Insert the water hoses (T
and
1
• Operation:
).
1

CARE AND MAINTENANCE

•
• Clean the exterior part of the machine with a dry
.
1
• Move the appliance only by catching the carrying
• Store the appliance and the accessories in a dry
and T
) into the
1 2
tank T
- Fix the flexible hose L into the suction inlet
H.
- Attach the end of the water hose U to the
quick-release connector located on the
motor unit A .
- Fix, at the end of the flexible hose L, the
extensions M.
- Secure the hoses (U
provided.
- Fix in the most suitable accessor.
- Plug the unit in.
- Turn on the illuminated ON-OFF switch C.
- Press the lever on the tap and both the
switches F to select operation of 1 or 2 mo-
tors.
- Release the lever on the tap (the pumps
will automatically shut down).
- Use the switches F.
- Use the switches B to turn on the 1 or 2
pumps.
- To start cleaning, place the accessory on
the surface, press the lever on the tap, and
pull it toward you.
- When you've finished, turn off the switches
F and B and the master switch C.
- Use the lever on the tap to drain the re-
sidual detergent.
• If the detergent runs out, turn off the
switches F immediately to prevent dam-
age to the pumps.
The machine shall be disconnected from its
power source, by removing the plug from the
socket-outlet, during cleaning or maintenance
cloth.
handle located on the motor head.
safe place, out of the reach of children.
and U
) with the clips
1 2
11