GE TouchSmart 13479 Guia De Inicio Rapido

http://waterheatertimer.org/plug-in-timers.html
Fast, easy setup!
1. Setup
Plug your device into the timer and make sure it is
turned on. Plug the timer into an electrical outlet. For
first use, press the reset button ( ) in the lower right
corner.
2. Set the time
Use up ( ) and
down ( ) arrows
to set current time.
3. Choose your program
There are 3
pre-programmed times
that run individually or
simultaneously. Choose
from the following:
"morning" (5am-8am)
"evening" (5pm-12 am)
"all night" (6pm-6am).
When a time is chosen,
the blue LED indicator
light will turn on. You may
run multiple programs.
r
MADE IN CHINA
GE is trademark of General Electric Company and is under license by Jasco Products
Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 1-year limited warranty. Visit www.jascoproducts.
com for warranty details product registration.
Questions? Contact us at 1-800-654-8483 between 7:30AM–5:00PM CST.
13479 Version 1
Additional Features
Countdown
•
Press "countdown," then
use up ( ) and down ( )
arrows to set from 1
minute to 24 hours,
and press "countdown"
again.
Manual/Override
•
Manual: Press and
buttons t o manually
control device p lugged
into timer.