Parts List - asalvo COLUMPIO 3 -1 Instrucciones Para El Montaje Y Uso

Thank you for purchasing Asalvo product.
For the safety of your child please read these instructions and keep for future refe-
rence.

PARTS LIST

a. seat fabric
b. backrest tube
c. seat support tube
d. fabric fixed steel wire
e. cross
f. left support tube group
g. right support tube group
h. front leg
i. rear leg
j. hanging tubes
k. left driving part
ASSEMBLY
1
Insert the seat support tube into the backrest tube until a "click"
2
Put on the seat cover to the seat frame
3
Insert the steel wire through fabric sewing housing, put the two ends of
the steel wire fit into the plastic holes until sound "click".
4
Fix the seat fabric onto the steel wire with the buttons.
5
Fix the backrest fabric onto the steel wire with the buttons
6
Install the intermediate rail onto the back of fron t tray with screw
7
Install the font tray into the holes until a "click"
8
Unfasten the screw. (attention: do not take off the screw caps). Insert the leg
into music device and fasten the screws. Same as the other side.
Attention: the folding buttons on legs should be outward always.
9
Assemble the bouncer frame by insert the rear connect tube into the
two seat tubes
10
Install the seat unit onto the bouncer frame until a "click"
l. right driving part
m. rocking tubes
n. bouncer connect tube
o. toy bar main
p. toy bar arm
q. toys
r. head support
s. front tray
t. intermediate rail
u. AC-DC Power Adapter
11
EN