After Use; Maintenance And Cleaning - Sinbo SSC 6411 Manual De Instrucciones

QUICK START GUIDE
The steam cleaner is designed for cleaning bathrooms, toilets, kitchens, glass and mirrors, as well as
most other smooth surfaces. Hot steam cleans as it dissolves oily and greasy substances.
Before using this unit for the first time
Before first use, the unit should be cleaned as described in General care and cleaning.
OPERATION
Accessories
1. Take out the long spray nozzle, general spray nozzle and extended spray nozzle on [Fig 1].
2. Install the round brush nozzle and bent spray nozzle onto [Fig 3].
3. The window spray nozzle shall be installed on [Fig 2].
USE
1. Unscrew the safety valve (3), and then add water by funnel (advice to use pure water),we suggest the
max capacity is 175ml. Finally, screw on the safety valve. Do not open the safety valve when using the
appliance. You could only turn on the safety valve when power is cut and the appliance is completely
cooled down. [Fig 5] [Fig 6] [Fig 7].
2. Switch on power supply, you will find indicator light (7) turn on and the machine immediately starts
heating process. When it heats about 3 min to specified temperature, indicator light (7) will be turned
off, press the steam button, and steam will be sprayed out slowly. So the machine is easy to operate.
With complete cleaning accessories supplied, the machine can be assembled and disassembled easily.
It can be used to clean the doors, windows, floor boards and clothes, and thus is applicable widely.

AFTER USE

After your use, please put rest water out of boiler and unplug the power cable.

MAINTENANCE AND CLEANING

According to the functions of various series of steam cleaner, in order to increase its life-span, users
must follow the daily maintenance and maintenance way.
1. Correctly use the product according to the instruction. After each use, picked up the power cord.
2. After the appliance is completely cool down, unscrew the safety valve and pour rest water out of the
boiler. Clean and dry the boiler [Fig 10].
3. Put all components which had been cleaned into the carton in sequence. Then stored it in ventilated
dry place.
ECO ADVICES
Type of water to use
You can use normal tap water to fill the tank. Therefore, especially if the water of your city is very hard,
we advise you to mix it with distilled water or use distilled water only.
We advise you to empty the boiler after use in order to not create limestone inside the boiler.
Do not add anything to the contents of the boiler and do not use water from clothes dryers, scented or
softened water, water from refrigerators, batteries or air conditioners and rain water. These contain
organic waste or mineral elements that become concentrated when heated and cause spitting, brown
staining or premature wear to the boiler. Use of these types of water will negate the guarantee provided
with the product.
STEAM CLEANER CLEANING
Clean often the steam cleaner in order to keep the function performance following the instructions of
the Maintenance and cleaning chapter.
- 8 -