Verifying Proper Installation (Belkin Driver) - Belkin F5U222 Manual Del Usuario

6. Drivers for the "Belkin USB 2.0 Hi-Speed Host Controller" will now be
located.
7. I nstallation of the "Belkin USB 2.0 Hi-Speed Host Controller" will now be
completed.
8. Windows will now detect the "USB 2.0 Root Hub Device".
9. Drivers for the "USB 2.0 Root Hub Device" will now be located.
10. Installation of the "USB 2.0 Root Hub Device" will now be completed.
The installation procedure is now complete.

Verifying Proper Installation (Belkin Driver)

After installation is complete, check the Windows Device Manager to confirm
that all components of the Notebook Card have been
properly installed.
1. Right-click on "My Computer".
2. Select "Properties".
3. Select the "Hardware" tab and click on the "Device Manager" button.
4. After installation of the Belkin USB 2.0 driver, you will notice that a second
"Universal Serial Bus Controllers" heading has been added to the device
list.
a) Click the plus sign (+) next to the original "Universal Serial Bus
Controllers" heading. You will find that two "NEC USB Open Host
Controller" entries and two "USB Root Hub" entries have been added to
the list of devices.
b) Click the plus sign (+) next to the new "Universal Serial Bus Controllers"
heading. You will find one entry for "Belkin USB 2.0 Hi-Speed Host
Controller" and one entry for "USB 2.0 Root Hub Device".
Installation
EN
17 17