Important safety instructions
GB
Theseoperatinginstructionsfamiliarise
youwithimportantsafetyinstructions
andinformationrequiredtooperatethe
deviceproperly!
Pleasereadtheinstructionscarefully,
keeptheminasafeplaceandpassthem
ontothenextownerwiththedevice,
ifnecessary!
Allsafetyinstructionsserveforyourper-
sonalprotectionaswell!
G
This device is in compliance with the gener-
ally accepted technical rules and the relevant
safety regulations.
G
This device is not intended for use by
persons (including children) with limited
physical, sensory or mental abilities, or who
lack experience and/or know-how, unless
they are under supervision of a person re-
sponsible for their safety, or have received
according instruction by that person on
how to operate the device.
G
Use device as intended!
G
Checkthefunctioningofthesprayuniteach
timebeforestartup,payingspecialattention
tothehoseconnectionandthescrewcon-
nectors.Checkmaterialforcracks,brittleness
andcorrosion.
G
Donotexposethefilledtanktostrongsun-
shineforanylongperiodoftime.
Operatingtemperaturesmustnotexceed
+40°C.Protectunitagainstfrost.
G
Clean tank thoroughly immediately after
use and then dry completely.
G
Sprayingagentsthatareenvironmen-
tallyharmfulshouldbeuseupasfaras
possibleontheobjectofthespraying,
Ersatzteile auf www.gluesing.net
anyunavoidableresiduesshouldbeput
inasuitableholdingcontainerandsent
forspecialdisposal.
Observealllawsandregulationscon-
cerningmaterialshazardoustowaters
whentemporarilystoringanddispos-
ingofsuchmaterials.
G
Keep away spraying devices and agents
from children, animals and waters.
G
Donottrytoclearblockednozzlesbyblow-
ingthemoutwithyourmouth.
G
The unit is not intended to store liquids, it
must be emptied out after each time it has
been used and washed out thoroughly.
G
Always check the the safety / pressure
relief valve (A) when pumping up the unit
and do not exceed the maximum permissi-
ble pressure of 3 bar.
G
Allpartsthatareunderpressureorconduct
theliquidoroperatingpartsandthethe
safety/pressurereliefvalvemustbechecked
regularlytoensurethattheyareinperfect
conditionandfunctionproperly.Stopusing
theunitatonceifanydamageissuspected.
G
Do not allow it to remain pressurised for an
extended period.
G
Asaprecautionarymeasure,werecommend
thatthepumpsprayunitbesubjectedtoa
particularlythoroughinspectioneverytwo
years,preferablybythemanufacturer.
Repairstothetankarenotpermitted.
G
Repairstotheequipmentshouldonly
becarriedoutbyServiceStations.Order
sparepartsfromyourauthorised
dealer.Iftherequiredpartsarenotin
stock,hewillprocurethemforyouas
quicklyaspossible.
10