Rules For Safe Operation - Ryobi ART-3 Manual De Utilización

GB
FR DE ES
WARNING
This router table can use Router ERT-1500V,
ERT-1150V, ERT-1150VN, ERT-2100V.Do not
use cutters with undersized shanks. Undersized
shanks will not tighten properly and could be
thrown from the tool, causing injury.
INTRODUCTION
Your router table has many features for making router
operations more pleasant and enjoyable. Safety,
performance, and dependability have been given top
priority in the design of this router table making it easy to
maintain and operate.
CAUTION:
Carefully read through this entire Operator's
Manual and the entire router Operator's Manual
before using your new router table. Pay close
attention to the Rules for Safe Operation and all
Safety Alert Symbols including Danger, Warning,
and Caution. If you use your router table properly
and only for what it is intended, you will enjoy
years of safe, reliable service.
The operation of any tool can result in
foreign objects being thrown into your
eyes, which can result in severe eye
damage. Before beginning power tool
operation, always wear safety goggles or
safety glasses with side shields and a full face shield
when needed. We recommend Wide Vision Safety Mask
for use over eyeglasses or standard safety glasses with
side shields.

RULES FOR SAFE OPERATION

READ ALL INSTRUCTIONS
Know your power tool. Safe operation of this
Q
power tool requires that you read and understand
this operator's manual, the Operator's Manual for
the router and all labels affixed to the tool. Learn the
applications and limitations as well as the potential
hazards.
WARNING
Do not connect your router or router table to a
power source until you have assembled and
adjusted the router table as described in this
manual and have read and understood all
precautions and operating instructions in the
manual and printed on the tool.
IT NL PT DK SE FI NO RU PL CZ
English
WARNING
When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock, and personal injury.
Use common sense. Some of these basic safety
precautions include the following:
Always keep all guards in place and in good
Q
working order.
Remove adjusting keys and wrenches. Get in the
Q
habit of checking to see that hex keys and adjusting
wrenches are removed from the tool before turning it
on.
Keep the work area clean. Cluttered work areas and
Q
work benches invite accidents.
Do not use in dangerous environments. Do not
Q
use power tools near gasoline or other flammable
liquids, in damp or wet locations, or expose them to
rain. Keep the work area well lit.
Keep children away from power tools. All visitors
Q
should be kept at a safe distance from the work area.
Make the workshop child-proof with padlocks and
Q
master switches or by removing starter keys.
Do not force the tool. It will do the job better and
Q
safer at the rate for which it was designed.
Use the right tool. Do not force the tool or
Q
attachment to do a job for which it was not designed.
Wear proper apparel. Do not wear loose clothing,
Q
gloves, neckties, rings, bracelets, or other jewelry that
could get caught in moving parts. Non-slip footwear
is recommended. Wear protective covering over long
hair.
Always wear safety glasses with side shields.
Q
Everyday eyeglasses have only impact resistant
lenses; they are not safety glasses.
Protect your lungs.Wear a face or dust mask if the
Q
cutting operation is dusty.
Protect your hearing. Wear ear muffs or plugs
Q
during periods of extended use.
Secure the work. Use clamps or a vise to hold the
Q
work when practical. It's safer than using your hand
and frees both hands to operate the tool.
Do not overreach. Keep proper footing and balance
Q
at all times.
Maintain the tool with care. Keep blades sharp and
Q
clean for the best and safest performance. Follow
instructions for lubricating and changing accessories.
Disconnect power tools before servicing or before
Q
changing accessories such as blades, bits and
cutters.
1
HU RO LV LT EE HR SI SK GR TR