Timberland AS32A Manual De Instrucciones página 2

How to set time
1. Pull the crown out to the 2nd click position when the second hand is at the 12 o'clock position.
2. Turn the crown to set the hour and minute hands.
Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
- When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back
to the exact time.
3. Push the crown back to the normal position.
How to set date
1. Pull the crown out to the 1st click position.
2. Turn the crown to set the date.
- Do not set the date between 9:00 p.m. and 1:00 a.m..
3. Push the crown back to the normal position.
Tips: When the date change during daytime, it happens when a.m./p.m. is wrongly set. Advance the hour
hand by 12 hours.
Hour hand Minute hand
Second hand
Date
Crown operation
Crown position
N : normal 1 : 1st click
Turn counterclockwise
Crown Free
for date change
Features of the solar watch
This watch is a solar-powered watch containing a solar cell underneath the dial to convert any
form of light into "electrical energy" and store the power in a secondary battery.
Unlike conventional quartz watches, this watch does not use a silver oxide battery, thus
eliminating the need for battery replacement.
• Running time
Expected running time from full charge to stoppage will be around 4 months.
How to charge and start the watch
• Charging the watch
When you start the watch or when the energy remaining in the secondary battery is very low,
charge it sufficiently by exposing the watch to light.
- It is not necessary to charge the watch fully. It is important, however, to charge the watch sufficiently,
especially in the case of initial charging.
• Caution
When charging the watch, do not place it too close to fluorescent lamp or other light sources as
the watch temperature will become extremely high, causing damage to the parts inside the watch.
Crown
2 : 2nd click
Time setting