Secura QSF207 Manual De Instrucciones página 13

4. Install wall plate using two lag bolts and two washers . Tighten the lag bolts only until they are pulled firmly
07 08 09
against the wall plate.
NOTE
: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting
08
the wall plate until level. Tighten the bottom lag bolt when adjustments are complete.
07
CAUTION:
Avoid potential personal injury or property damage! Both lag bolts MUST BE firmly tightened to prevent
unwanted movement of the wall plate . Ensure the wall plate is securely fastened to the wall before continuing on to
07
the next step.
4
07
07
08
09
08
13