Secura QSF207 Manual De Instrucciones página 15

3. Insert two anchors
10
CAUTION:
Be sure the anchors
4. Install wall plate
07
pulled firmly against the wall plate.
NOTE:
If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt
wall plate until level. Tighten the bottom lag bolt
CAUTION:
Avoid potential personal injury or property damage! Both lag bolts MUST BE firmly tightened to prevent
unwanted movement of the wall plate
next step.
3
.
are seated flush with the concrete surface.
10
using two lag bolts and two washers
08
08
. Ensure the wall plate is securely fastened to the wall before continuing on to the
07
10
. Tighten the lag bolts
09
when adjustments are complete (see page 13 note).
4
only until the washers
08
and shifting the
08
07
09
08
are
09
15